Description
Get everything you need to install a bottom drain in your above ground pool in one easy purchase. Easily gain control of directing the water and enhanced safety as you install the bottom drains and meet the required regulations in your area.
Note: This will fit up to a 30′ round pool.
Features:
- 4-way valve
- 2 bottom drains w/ anti-vortext covers
- 25′ of 1½” flexible PVC hose
- Quick disconnect fittings
- All necessary clamps and fittings
- Roll of Teflon tape
Benefits:
- All-in-One: This bottom drain kit comes with all the necessary elements to install a bottom drain in your above ground pool.
- Enhanced Water Quality: A bottom drain kit improves water circulation, enhances chemical distribution, and reduces manual cleaning by pulling debris from the floor.
Instructions:
- Locate the center of the pool and install center drains at least 3′ apart from one another
- Dig a trench 4″ to 6″ deep. The trench should lead out and under the bottom channel of the pool to the area where the filter will be set
- Connect the hose to the fittings and bottom main drains, using Teflon Tape on all threads. Clamps should grip on the ridged portion of fittings
- Before packing the trench with dirt, tape over the main drain openings and screw holes so as not to get dirt into screw holes. Do not pack the trench with sand
- Leave the hose at least 6″ long on the outside pool wall for hooking up to the filter. Check with local codes to see if this hose length needs to be longer
Reviews
There are no reviews yet.